Easily Integrated ▪ Easily Maintained ▪ EPA-Recommended Technology
CARBTROL’S State-of-the-Art Wash Water Recycle Systems Conserve Water at Vehicle Washes
CARBTROL offers a complete line of wash water treatment and recycle systems using EPA-recommended activated carbon adsorption / oxidation technology to contain and treat waste waters generated from vehicle washing operations in Public Works Departments and Highway Garages. These systems are custom-designed for auto, truck, bus, train, construction and highway maintenance vehicles.
CARBTROL’S systems use EPA-recommended Activated Carbon Technology
CARBTROL has utilized its 30+ years of experience in the treatment and remediation of contaminated groundwater and hazardous waste sites to develop a state-of-the-art treatment and recycle system. Users at highway maintenance and municipal public works garage vehicle washing operations meet and exceed their environmental water conservation goals.
The CARBTROL system can provide 10-150 GPM of recycled wash water on a continuous basis. Many competitive treatment systems are limited to a flow capacity of 10 gallons per minute (GPM) and 1,000 to 2,000 gallons per day (GPD). The CARBTROL system has no difficulty in handling wash water from a heavy equipment washday. If a hose is left on or rainwater enters the washing area, the system handles these fluctuations easily.
The US EPA has published a listing of recommended treatment technologies for removing oil and grease, hydrocarbons and soluble organics from waste water, which include activated carbon adsorption, chemical precipitation and oxidation. CARBTROL incorporates all of these technologies utilizing ultra high capacity granular activated carbons, which are designed to support locations requiring zero discharge of pollutants.
CARBTROL's Wash Water Recycle System handles changes in waste characteristics and flows, such as variations in temperature and pH, and temporary system shutdowns. Other treatment technologies may be subject to process upsets under these conditions, or may experience foaming problems from soaps, and detergents. These do not affect CARBTROL’s system.
Carbtrol's Wash Water Recycle System operates for extended periods without requiring any operator attention. The system is designed to allow easy inspection and repairs, if necessary. Typically, maintenance only requires one or two hours per week.
Read about CARBTROL's Wash Water Recycle Systems installed and planned at multiple locations along the NJ Turnpike: NJ Turnpike Authority Case Study
Primary Collection Pump for Agitation of Dirty Water
At water high level, the pump engages and the water is vigorously agitated to ensure that loose waste, dirt, or grass are separated and do not accumulate in the sump.
Combined Clarifier/Water Storage Tank For Silt, Fine Sand and Free Oil Removal
Screened wash water is pumped from the transfer sump to the clarifier, where additional solids are removed by gravity separation. The clarifier additionally serves as a water storage tank, prior to final treatment and reuse.
Treatment Skid For Filtration – Clear Water Is Available on Demand
Clarified wash water is pumped to the treatment skid, which includes activated carbon adsorption and oxidation as a final polishing step,producing a quality water ready for reuse.
CARBTROL'S licensed engineers can custom design a system from 10 - 150 GPM to meet the needs of any operation.
Centrifugal Self Priming Process Transfer Pump - 2 HP with Inlet Strainers and Foot Valves
Primary Sump Level Controls
High-volume Activated Carbon Filter with Manual Backwash
Water Storage / Equalization Tank with Level Management
High volume Ozonation System with ½ HP Recirculation Pump
2 HP Recycle Water Booster Pump
Interconnecting Above Ground Piping and Valving
NEMA 4 Control Panel, including HOA Switches, Alarms, & Starters
Factory assembled- skid mounted- piping, filter and control components
Installation, start up and training of operating personnel
Technical support as required
Detailed Operating and Service Manufacturing
Systems are shop manufactured as modular components and shipped complete with all above ground equipment, ready for easy installation. Once installed, minimum maintenance is required. Activated carbon is simply replaced annually.
Product Data Sheets
Discusses carbon adsorption, adsorption isotherms, and design considerations for liquid phase activated carbon systems
Product Data Sheets